QCC-816 Auto Defrost System Salt Spray Test Chamber , Corrosion
salt spray apparatus / Equipment
Cyclic corrosion testing simulates the closet actual natural
environment, such as salt spray, drying, humidity and temperature
alternating. The testing is strict than natural environment, and
can be programmed or tested individually.
Control System:
※ High precision P.I.D. temperature controller to limit the
temperature differences
※ Optional continuously or cyclic spray, apply fully automatic
detecting system
※ Double over-heating protection systems protect both of chamber
and operator.
※ Optional RS232 interface used to connect with computer
Salt Spray Test Chamber Conform But Not Limited Following Testing
Standards:
※ ASTM B117 Standard Practice for Operating Salt Spray Apparatus
※ ASTM B368-97 Standard Method for Copper-Accelerated Acetic
Acid-Salt Spray (Fog) Testing (CASS Test)
※ ASTM B380-97(2007) Standard Test Method of Corrosion Testing of
Decorative Electrodeposited Coatings by the Corrodkote Procedure
※ ASTM D1735-99 Standard Practice for Testing Water Resistance of
Coatings Using Water Fog Apparatus
※ ASTM G85 - 11 Standard Practice for Modified Salt Spray (Fog)
Testing
※ SGM-GM4465P Water Fog Humidity Test
※ ISO7253:2001 Paints and varnishes – Determination of resistance
to neutral salt spray (fog)
※ ISO9227-2012 Corrosion tests in artificial atmospheres – salt
spray tests
※ DIN 50021: Salt spray testing
※ JIS Z2371 Methods of Salt Spray Testing
Specifications:
Model | QCC-270 | QCC-510 | QCC-816 | QCC-1200 |
Interior
Dimensions
(mm) | W | 900 | 1200 | 1600 | 2000 |
D | 600 | 850 | 850 | 1000 |
H | 500 | 500 | 600 | 600 |
Exterior Dimensions
(mm) | W | 1460 | 2200 | 2600 | 3000 |
D | 910 | 1200 | 1450 | 1650 |
H | 1280 | 1450 | 1550 | 1600 |
Solution Tank | 25L | 60L |
Power Supply | AC 220V /50HZ/1P | AC380V/50HZ/3P |
Ambient Temp. & Humid. Range | +5℃~ +35℃ / <85%RH |
Air Pressure | 86~ 106Kpa |
Testing Temperature | NSS ACSS 35℃±1℃ / CASS 50℃±1℃ |
Pressure Barrel Temperature | NSS ACSS) 47℃±1℃ /CASS 63℃±1℃ |
Drying Test | Chamber temperature: 40℃-70℃( ±0.5℃), Humidity: 30%-98% (±5%RH) |
Temperature and Humidity Test | Chamber temperature range: RT℃-70℃(±2℃) (Low temperature: below 25℃
without humidity) |
Cooling time: -70℃～RT℃ within 35min
Heating time:RT-50℃ within 60 min |
Temperature uniformity: ±2℃
Humidity range: 30%-98% (uniformity: ±2%RH) |
Temp. & Humid. Test | Temperature test:45℃±2℃ | Humidity test:85%~98% ±2%RH |
Solution Consistence | NaCi 5% |
PH Value | NSS ACSS:6.5~7.2; CASS:3.0~3.2 |
Air pressure | 1.00±0.01kgf/cm2 |
Temperature fluctuation | ≦±0.5℃ |
Temperature uniformity | ≦2. 0℃ |
Temp. & Humid. Resolution | 0.1℃; 0.1%R.H. |
Spray quantum | 1.0~2.0ml/80cm2/h |
Material | Polyvinyl chloride (P.V.C) |
Heater | Corrosion-resistant titanium tube |
Temperature sensor | Platinum Resistance PT-100 |
Controller | LCD touch screen temperature and humidity controller |
Safety device | Over-temperature protection , leakage protection |
Note:
1. The above specifications are for reference only, the actual
specifications for the main quotation.
2. Custom made is available according to customers’ special
requirements
Features:
※ Powerful LCD touch screen temperature and humidity controller
※ Optional recorder used to save temperature and humidity curve
graph
※ Programmable control system, continuously and cyclic spray
※ Support power off memory, available to continue testing after
power recover
※ Auto/manual water refilling system make sure non-stopping testing
※ Precision glass nozzle makes sure fog diffuses well-distributed
※ Auto descending and ascending system for testing cover, makes
operation easy and safe
※ Clearly observe testing samples with auto defrost system
